Izdelki za oprema za modele (16)

Wir entwickeln, konstruieren und bauen jede von Ihnen gewünschte Vorrichtung. Hierzu gehören z.B. manuelle, halbautomatische oder vollautomatische Dichtheitsprüfvorrichtungen, Montagevorrichtungen, Nietvorrichtungen, Schweißvorrichtungen, Messvorrichtungen oder Fügevorrichtungen. Sollten Sie Vorrichtungen nach Ihren eigenen Konstruktionen bei uns bauen lassen wollen, so ist dies auch jederzeit möglich.

Die VP Basic ist eine kostengünstige Einstiegsvakuumpresse, ohne Kompromisse bei der Qualität einzugehen. Die Vakuumpresse ist mit einer trockenlaufenden, leistungsstarken 25 m³/h Vakuumpumpe und einem 100 Liter Vakuumtank ausgestattet. Die beschichtete Arbeitsplatte ist sehr robust und bietet Ihnen mit der serienmäßigen Vakuumverteilerplatte ein schnelles und gleichmäßiges Vakuum auf der gesamten Arbeitsfläche. Ihre VP Basic ist bestens für alle typischen Holzverarbeitungen wie Furnieren, Ummanteln, Belegen mit Schichtstoff oder für das Verformen von Werkstücken geeignet. Mit einer Silikonmembrane können Sie auch thermoplastische Verformungen von Mineralwerkstoffen oder Kunststoffen durchführen. Um Ihre Vakuumpresse so flexibel wie möglich einzusetzen, können Sie diese mit einem optional erhältlichen Fahrwerk ausstatten. Weiterhin ist optional eine Abdeckplatte, mit der die VP Basic sogar als fahrbarer Arbeitstisch genutzt werden kann.

SPIROL's Model DP self-contained vertical drilling and pinning machine is ideally suited for moderate to high production applications that require accurate drilling and pinning of assemblies. The concept of drilling and pinning with one system eliminates tight tolerance and precision drilling of individual components to ensure proper alignment of holes for assembly. The Model DP Drilling and Pinning Machine consists of an automatic high-precision drilling unit, a SPIROL Model CR Heavy Duty Pin Insertion Machine and a precision air-powered linear slide unit to move the assembly between the drill unit and installation station. The Model DP Drilling and Pinning Machine can drill holes ranging in diameter from 0.8mm-6mm (.031”-.250”) and is capable of insertion forces up to 8 kN (1,800 lbs).

This robust, vertical installation machine is specifically designed to install Compression Limiters into a variety of plastic components. The machine is available in two models: the CL1000 is capable of 4.4 kN (or 1,000 lbs.) of installation force and the CL2000 is capable of 8.8 kN (or 2,000 lbs. of installation force, and is available with multiple installation tips in nearly any configuration at various elevations. The incorporation of a touchscreen operator interface machines makes our machines easy to use and customisable. Language conversion is easily executed to support international use. The Model CL is equipped with installation verification to ensure that the machine has completed a full installation cycle and a Compression Limiter was installed at each location. This highly flexible platen style machine with 228mm x 279mm (9" x 11") working area. The Model CL is available with optional enhancement features for error-proofing and maximum efficiency.

Die trockenlaufende 8 m³/h Vakuumpumpe für einen Vakuumsack und die kleinen VPL-Modelle. Die technischen Daten auf einen Blick: - Saugleistung: 8 m³/h, trockenlaufend - Dauerläufer - Max. Vakuum: 85% - Anschlussleistung: 0,35 kW (230 Volt) - Abmessungen: 390 x 220 x 230 mm - Gewicht: 18 kg

An accurate and consistent method to install virtually any Compression Limiter into plastic applications requiring up to 4.5kN (1000 lbs). Install just one Compression Limiter into one assembly, or several Limiters across multiple assemblies simultaneously for increased productivity. The Model CP’s quick-change tooling creates the flexibility to adapt the platform to a variety of products within seconds. The Model CP has a 230mm x 280mm (9”x11”) work area and is built on a rigid steel frame with high-precision shafting and linear bearings resulting in smooth operation, precise positioning, repeatability, and durability. The Model CP is available with optional enhancement features for error-proofing and maximum efficiency.

This versatile installation machine is suited for moderate to high production applications requiring up to 1.3 kN (300 lbs.) of installation force. The pin insertion head advances and retracts for ease of loading and unloading of the components to be pinned. The machine’s insertion bushing is positioned close to the part for smooth installation. A vibratory feeder and orientation head transfers the pin from the feeder bowl to the installation position, eliminating the need for the operator to handle the pins. A quick-clear mechanism allows for easy clearing of the feed tube without the need for tools when changing pin size or performing maintenance.

Modell CP Pneumatische Installationsmaschine für Compression Limiter Eine genaue und einheitliche Methode zur Installation praktisch aller Compression Limiter in Kunststoffanwendungen, die eine Kraft von bis zu 4,5kN erfordern. Installieren Sie nur einen Compression Limiter in einer Baugruppe oder mehrere Compression Limiter in mehreren Baugruppen gleichzeitig, um die Produktivität zu erhöhen. Das Schnellwechselwerkzeug des Modells CP bietet die Flexibilität, die Plattform innerhalb von Sekunden an eine Vielzahl von Produkten anzupassen. Das Modell CP hat einen Arbeitsbereich von 230 mm x 280 mm und ist auf einem stabilen Stahlrahmen mit hochpräzisen Wellen und Linearlagern aufgebaut, die einen reibungslosen Betrieb, präzise Positionierung, Wiederholbarkeit und Langlebigkeit gewährleisten. Das Modell CP ist mit optionalen Erweiterungsfunktionen erhältlich. Diese sorgen für Fehlersicherheit und maximale Effizienz.

This versatile tool is ideally suited for low to moderate levels of production for assemblies that require installation forces up to 22.2 kN (5,000 lbs). The Model PMX Extra Heavy Manual Pin Inserter easily accommodates quick change-overs. The fixture is simply replaced at the base of the machine, and the pin diameter is easily changed by switching the pin driving chuck. This Extra Heavy Duty Manual Pin Inserter will provide smooth operation, repeatability and durability.

The SPIROL Model PH Heat Insert Driver provides an accurate and consistent method to simultaneously install multiple Threaded Inserts or Compression Limiters at multiple elevations. Simultaneous installation dramatically increases productivity and simplifies the number of manufacturing steps to complete an assembly. Additionally, the platen head and fixture can be easily changed to accommodate quick change-over to different assemblies associated with new production runs. This machine can be used to install 12 Inserts into 1 assembly, or a fewer number of Inserts into a larger number of assemblies – as long as the total combination does not exceed 12 Inserts.

The SPIROL Model HA Automatic Heat Insert Driver provides an accurate and consistent method to install virtually any type of Heat/Ultrasonic Style Insert into thermoplastic assemblies. With this exceptionally versatile machine, the operator does not need to physically touch the Insert during the entire installation process. SPIROL’s Model HA Automatic Heat Insert Driver has been designed to eliminate the dependency on the operator to control the factors of time, temperature and pressure to ensure nearly perfect flow of the plastic for optimal retention and performance. The Model HA Automatic Heat Insert Driver installs Threaded Inserts ranging in size from M2 – M8 metric threads and #2 – 3/8 unified threads. The machine can be configured to accommodate a variety of applications and the heat tips are easily interchangeable to accommodate various sized Inserts.

The Model CLX operates the same way as SPIROL's Model CL, yet this extra-large Compression Limiter Installation Machine is custom-designed to accommodate larger assemblies outside the standard footprint of the Model CL. Visit www.SPIROL.com to learn more!

This exceptionally versatile tool for post-mould assemblies is ideally suited to all levels of production: from a single unit for prototype assembly, to multiple units on an assembly line. The SPIROL® Model CM Manual Compression Limiter Installation Machine easily accommodates quick change-overs by simply: • Replacing the fixture • Swapping insertion punch/pusher tip • Adjusting the positive stop for new install height. The use of high quality shafting and bearings results in smooth operation, precise positioning, repeatability, and durability. The Model CM Manual Compression Limiter Installation Machine installs Compression Limiters ranging in diameter from M3 to M10 metric and #4 to 3/8" unified, and has a maximum insertion force of 0.9kN (200 lbs).

This exceptionally versatile tool is ideally suited to all levels of production: from a single unit for prototype assembly, to multiple units on an assembly line. The Model PM Manual Pin Inserter easily accommodates quick change-overs. The part holding device (fixture) is simply replaced from the base of the machine. The pin diameter is easily changed, positive pin depth easily adjusted, and part size variation easily accommodated. The use of high-tech shafting and bearings results in smooth operation, precise positioning, repeatability, and durability. The Model PM Manual Pin Inserter installs pins ranging in diameter from 0.8mm-4mm (.031”-.156”) with a maximum insertion force of 0.9 kN (200 lbs).

Designed to install virtually any type of Heat / Ultrasonic Style Insert. As much as 75% of an Insert’s performance is the direct result of how well it was installed. Therefore, in order to maximize performance, all of the factors that impact installation must be carefully controlled. SPIROL’s Model HM Manual Insert Driver has been designed to eliminate the dependency on the operator to control these factors. The result is nearly perfect flow of the plastic for optimal retention and performance. The Model HM Manual Insert Driver is simple to operate and easily adjustable. The Model HM installs Inserts ranging in size from M2 - M6 metric threads and #2 - 1/4 unified threads, and the simple up-down adjustment of the machine makes it easy to accommodate various sized plastic components.

The SPIROL Model HP Pneumatic Heat Insert Driver provides an accurate and consistent method to install virtually any type of Heat/Ultrasonic Style Insert into thermoplastic assemblies. As much as 75% of an Insert’s performance is the direct result of how well it was installed. Therefore, in order to maximize performance, all of the factors that impact installation must be carefully controlled. SPIROL’s Model HP Pneumatic Heat Insert Driver has been designed to eliminate the dependency on the operator to control the factors of time, temperature and pressure to ensure nearly perfect flow of the plastic for optimal retention and performance. The Model HP Pneumatic Heat Insert Driver installs Inserts ranging in size from M2 – M8 metric threads and #2 – 3/8 unified threads.